🌐 VI | EN
🌐
Series Guide

OpenWrt Complete Series

Comprehensive guides from LuCI setup, networking, to advanced SQM Bufferbloat, VLAN, mwan3, WireGuard, and ImageBuilder compilation.

47 articles #openwrt #backup #restore #sysupgrade #luci #dns #dot #unbound #dnssec #privacy

📑 All Articles in OpenWrt Complete Series (47)

1

Back Up and Restore OpenWrt Configuration with LuCI and SSH

Back up OpenWrt configuration files through LuCI or sysupgrade over SSH, with verification and restore paths.

4 min read
2

DNS over TLS on OpenWrt with Unbound: Configuration and Leak Checks

Set up DoT with Unbound on OpenWrt, optionally integrate dnsmasq, enable DNSSEC, and test the result.

5 min read
3

LuCI Essentials on OpenWrt: Installation, HTTPS, Alternate Ports, and Offline Setup

Install LuCI with Firmware Selector or offline packages, change uHTTPd ports, and account for flash/RAM limits.

5 min read
4

Samba File Sharing on OpenWrt: Configuration, Firewall, and Troubleshooting

Set up Samba on OpenWrt for LAN shares, user accounts, Time Machine, discovery, and firewall handling.

7 min read
5

Using a USB Storage Device with OpenWrt: Drivers, Partitions, and Automount

Configure USB storage on OpenWrt from drivers and partitions to filesystems, automount, and disk spindown.

5 min read
6

OpenWrt 25.12+: Use apk Instead of opkg Without Bricking the Router

A practical apk v3 guide for OpenWrt 25.12 and newer: commands, repositories, upgrades, proxy use, and limits.

5 min read
7

Expand OpenWrt Overlay with Extroot: USB, ext4, and Recovery Paths

A complete extroot adaptation covering USB preparation, overlay migration, verification, troubleshooting, swap, USB dongles, LUKS, and Image Builder.

16 min read
8

Connect 2G/3G/4G/5G Modems to OpenWrt with ModemManager

Install USB modules, choose MBIM or QMI support, define a modemmanager UCI interface, and configure LuCI for WWAN.

4 min read
9

OpenWrt Wi‑Fi Repeater with relayd: LuCI, CLI, IPv6, and Recovery

Build a relayd repeater on OpenWrt with subnet changes, uplink, firewall, Relay bridge, AP setup, CLI, IPv6, NAT, and troubleshooting.

10 min read
10

Static Routes on OpenWrt: IPv4, IPv6, and netifd Routing Tables

Define persistent OpenWrt routes in /etc/config/network, including route, route6, metrics, tables, source addresses, and route types.

6 min read
11

802.11s mesh on OpenWrt: wpad preparation, configuration, and peer checks

A complete adaptation of the OpenWrt 802.11s guide, including wpad-mesh packages, wireless configuration, driver checks, CLI, peer dumps, and blocking.

5 min read
12

OpenWrt failsafe and factory reset: recover configuration before wiping it

A complete adaptation covering SquashFS checks, failsafe entry, overlay/extroot repair, soft and hard reset, re-flashing, and F2FS limits.

6 min read
13

IPv6 configuration on OpenWrt: WAN, prefix delegation, RA, and relay

An independent technical adaptation of the official IPv6 guide covering dhcpv6/static, prefix delegation, SLAAC, relay, routes, and ULA.

9 min read
14

PBR with netifd on OpenWrt: split VPN, WAN, and exception routes

A complete adaptation of the OpenWrt netifd Policy-Based Routing examples for VPN, WAN, IP sets, ports, OpenVPN, Tailscale, and prohibitive routes.

7 min read
15

Build a WireGuard server on OpenWrt with UCI and verify the tunnel

A complete adaptation covering packages, key pairs/PSK, firewall, interface, peer, traceroute, and runtime/persistent checks.

4 min read
16

Connect OpenWrt to another Wi‑Fi network as a routed client

Connect OpenWrt to an upstream Wi‑Fi network through wwan, keep the LAN in a separate subnet, and route traffic with NAT.

5 min read
17

Firewall4 and /etc/config/firewall on OpenWrt

Understand OpenWrt 22.03+ firewall4/nftables configuration, zones, forwardings, rules, redirects, IP sets, and includes.

5 min read
18

Installing OpenWrt: four methods and the recovery boundary

A careful OpenWrt installation guide covering OEM firmware, Ethernet bootloader, serial, JTAG, and ramdisk paths without guessing device values.

6 min read
19

Prepare TFTP recovery over Ethernet for OpenWrt

Set up TFTP recovery on macOS, Windows, and Linux, restrict UDP 69 to the LAN, and troubleshoot firmware transfers.

6 min read
20

VLAN on OpenWrt: swconfig, driver VLANs, and DSA

Explain tagged and untagged ports, identify swconfig versus DSA, and preserve the OpenWrt VLAN configuration paths.

6 min read
21

Building a bridged Wi-Fi AP with LuCI, DHCP, and configuration files

Building a bridged Wi-Fi AP with LuCI, DHCP, and configuration files

3 min read
22

Audit and Manage OpenWrt Base Services

A complete workflow for init scripts, ports, configuration, service testing, and rollback

3 min read
23

Organizing OpenWrt Interfaces and Firewall Zones

A complete guide to linking network interfaces to zones and verifying policy

2 min read
24

Block-Level NOR Backups on OpenWrt

Complete backup and recovery methods for NOR-based OpenWrt devices

7 min read
25

Separating Guest Wi-Fi with OpenWrt VLAN and Firewall

Complete procedure for a guest network, SSID, DHCP scope, VLAN boundary, and isolation

3 min read
26

OpenWrt Network Configuration with UCI: Devices and Interfaces

A complete guide to reading, editing, applying, and recovering /etc/config/network

3 min read
27

OpenWrt owut: controlled upgrades and package handling

OpenWrt owut: controlled upgrades and package handling

2 min read
28

Reducing bufferbloat on OpenWrt with SQM and CAKE

Reducing bufferbloat on OpenWrt with SQM and CAKE

2 min read
29

Upgrading OpenWrt with LuCI and CLI without accidental configuration loss

Upgrading OpenWrt with LuCI and CLI without accidental configuration loss

2 min read
30

Installing and expanding OpenWrt on x86: PC, VM, and server

Installing and expanding OpenWrt on x86: PC, VM, and server

3 min read
31

OpenWrt Multi-WAN with mwan3-nft: Requirements and Preparation

Prepare multiple WAN connections on OpenWrt with mwan3-nft, including version requirements, interfaces, metrics, and failover testing.

4 min read
32

Reduce Bufferbloat on OpenWrt with SQM for a Home Network

Install and configure SQM on OpenWrt to reduce latency while the connection is under heavy download or upload load.

4 min read
33

Basic Network Configuration on OpenWrt with LuCI and UCI

Understand interfaces, protocols, IP addresses, and basic network troubleshooting on OpenWrt.

3 min read
34

OpenWrt Firewall Zone: Create a Guest Network with Internet-Only Access

Understand OpenWrt firewall zones and isolate a Guest network from the internal LAN with LuCI.

3 min read
35

Basic Wi-Fi Configuration on OpenWrt for Beginners

Configure radios, SSIDs, security, and Wi-Fi status on OpenWrt with LuCI.

3 min read
36

How to Safely Back Up and Restore OpenWrt Configuration

Back up, inspect, and restore OpenWrt configuration before upgrades or major router changes.

3 min read
37

OpenWrt SDK and Toolchain: Choosing the Correct Build Tool

Understand the difference between the OpenWrt SDK, toolchain, and build system, and build a package for beginners.

4 min read
38

How to Use the OpenWrt ImageBuilder

Create a customized OpenWrt firmware image quickly with ImageBuilder instead of compiling the entire source tree.

3 min read
39

How to Build OpenWrt from Source for Beginners

Download the source, select a target, and build OpenWrt firmware from source.

4 min read
40

How to Resize the OpenWrt RootFS for EXT4 and SquashFS

Expand the OpenWrt root filesystem to use the full capacity of an SD card or USB drive.

5 min read
41

How to Install AdGuard Home Directly on OpenWrt

A complete guide to installing and configuring AdGuard Home directly on an OpenWrt router.

6 min read
42

How to Configure DDNS on OpenWrt

Configure Cloudflare or DuckDNS Dynamic DNS on OpenWrt so a changing public IP can be reached through a domain name.

3 min read
43

How to Port Forward on OpenWrt

Open a port on a router running OpenWrt or an OpenWrt-based firmware in three steps.

2 min read
44

How to Configure Fast Roaming with OpenWrt

Use two or more OpenWrt or OpenWrt-based routers as a wired fast-roaming Wi-Fi system.

2 min read
45

How to Configure PPPoE with a VLAN ID on OpenWrt

Configure PPPoE with a VLAN ID on OpenWrt or OpenWrt-based firmware.

3 min read
46

How to Configure PPPoE on OpenWrt

Configure a PPPoE connection on a router running OpenWrt or OpenWrt-based firmware.

2 min read
47

How to Configure OpenWrt as an Access Point and Add a Guest VLAN

Use an OpenWrt router as a wired access point behind a DHCP router and isolate Guest Wi-Fi with a VLAN.

3 min read

🔄 Explore Other Series