Xiaomi AX3000T (RD03) Firmware Collection and Related Information

Xiaomi presents this router almost like a flagship, complete with a polished landing page (see it here).

The Xiaomi AX3000T has an attractive design and strong specifications for its price, and it is highly regarded by Chinese users.

{{<collapse “Overview”>}} ||||| |—|—|—| |Dimensions|Length × width × height|With antennas: 225mm × 172mm × 208.8mm| |||Without antennas: 225mm × 172mm × 51mm| |Hardware|Model|Xiaomi Router AX3000T (RB03)| |||CPU|MediaTek Filogic 820 dual-core 1.3GHz| |||2.4GHz Wi-Fi|2x2, IEEE 802.11ax, theoretical maximum 574Mbps| |||5GHz Wi-Fi|2x2 160MHz, IEEE 802.11ax, theoretical maximum 2402Mbps| |||Antennas|4| |||Cooling|Passive cooling| |||Ethernet|4 × 10/100/1000M adaptive WAN/LAN ports, Auto MDI/MDIX| |||Standards|IEEE 802.11a/b/g/n/ac/ax, IEEE 802.3/3u/3ab| |Wireless|Dual-band|2.4GHz and 5GHz| |||Channels|2.4GHz: 1–13
5GHz: 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165| |||Modulation|DSSS, OFDM, MIMO-OFDM, BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM| |||Rate set|11n: MCS0–MCS15; 11ac: MCS0–MCS9; 11ax: MCS0–MCS11| {{}}

I. Enable SSH

See the Xiaomi AX3000T SSH guide here.

II. Firmware collection

II.1 Stock firmware

Version	Link
1.0.47	Xiaomi CDN
1.0.64	Xiaomi CDN

II.2 Official OpenWrt

See the detailed guide here.

II.3 U-Boot Mod by hanwckf

{{<notice “warning”>}} Back up the system partitions before making changes.

The only major drawback of U-Boot Mod is that stock manufacturer firmware cannot be upgraded through the web interface; it must be flashed from U-Boot Mod. {{}}

This U-Boot Mod can boot stock ROM without returning to the original bootloader.

Download the latest build here.

{{}} Basic procedure:

Download the latest release. The archive contains mt7981_ax3000t-fip-fixed-parts-multi-layout.bin.
Enable AX3000T SSH using this guide.
Log in over SSH and use SCP to copy mt7981_ax3000t-fip-fixed-parts-multi-layout.bin to the router’s /tmp directory.
Flash U-Boot Mod:

  # Check file integrity
  md5sum /tmp/mt7981_ax3000t-fip-fixed-parts-multi-layout.bin
  # Write to the FIP partition
  mtd write /tmp/mt7981_ax3000t-fip-fixed-parts-multi-layout.bin FIP
  # Verify again
  mtd verify /tmp/mt7981_ax3000t-fip-fixed-parts-multi-layout.bin FIP
  

{{}}

Entering U-Boot Mod is similar to Xiaomi recovery mode: unplug the router, hold reset, reconnect power, wait about 10 seconds, set the PC to 192.168.31.100, and open 192.168.31.1.

See the detailed discussion here.

I am currently busy and have not had time to write every detail; use the links above for the complete information.